BATTERY INSTALLATION ON CONTROLLER
1.Open the battery cover.
2.Insert 6 AA batteries (not included). Please follow the +/- polarity when insert
the battery.
3.Replace the battery cover.
PROTECTING CIRCLES INSTALLATION
Use a screw driver to fix the protection circles onto the quadcopter.
RECHARGE THE QUADCOPTER BATTERY
1.Take the battery out from the battery cover on the quadcopter.
2.Connect the battery with the USB cable (below picture) and connect the other
end of he USB cable to any USB port.
3.The charging indicating light will be OFF while charging and It will be ON when
charge is complete.
To Next Page
Loading...
