position making sure front wheels are securely placed on ground.
7. Operator will then disengage track by pushing red release bar located on the back of chair and
pushing in. Make sure track is in closed locked position.
8. Make sure track is locked by pulling in or out. If track does not move, track is locked. Disengaging
track will engage rear wheels.
9. To roll chair, operator will lower push handle to a comfortable height.
To Fold Trolley:
1. Grab backrest with one hand and pull red folding bar located under chair with other hand.
2. Guide trolley into its folded position.
To Charge Battery:
1. Turn locking key to release battery lock
2. Slide battery off rail
3. Plug battery charger cord into battery
4. Plug power outlet cord into wall socket
5. Turn “ON” battery power switch to start charging battery
6. Push charge level display button on battery to view charge level.
7. When battery is sufficiently charged, un-plug cord from wall socket and remove charger cord from
battery. Repeat Battery Installation steps above.
Digital Display:
1. When digital display is working properly, there will be an
illuminated green bar that only displays the battery charge
level.
2. There are six buttons on control panel. (1) Green Arrow
DOWN/DESCEND (2) RED POWER Button (3) Yellow Night
Light (4) Blue UP/ASCEND (5) Blue + Increase Speed (6) Blue –
Decrease Speed
Accessories Available:
• Wall mount bracket
YouTube Demo Video:
https://youtu.be/7aTLYxFfLvw
To Previous Page
Loading...