MSASafety Regulations
ALTAIR 4
6
GB
1.2 Liability Information
MSA accepts no liability in cases where the product has been used inappropriately
or not as intended. The selection and use of the product are the exclusive respon-
sibility of the individual operator.
Product liability claims, warranties also as guarantees made by MSA with respect
to the product are voided, if it is not used, serviced or maintained in accordance with
the instructions in this manual.
1.3 Safety and Precautionary Measures to be Adopted
Sensor maintenance
Do not block sensor openings as this may cause inaccurate readings. Do not press
on the face of the sensors, as this may damage them and cause erroneous read-
ings. Do not use compressed air to clean the sensor holes, as the pressure may
damage the sensors.
Observe proper battery maintenance
Use only battery chargers made available by MSA for use with this instrument; oth-
er chargers may damage the battery pack and the unit. Dispose of in accordance
with local health and safety regulations.
Use of the GALAXY Automated Test System is an alternate approved method for
charging ALTAIR 4 instruments.
Be aware of the procedures for handling electrostatically sensitive
electronics
The instrument contains electrostatically sensitive components. Do not open or re-
pair the unit without using appropriate electrostatic discharge [ESD] protection. The
warranty does not cover damage caused by electrostatic discharges.
To Next Page
Loading...
Need help?
General
