You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
English:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
French:
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son
fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
FCC ID: P9R-10214785
Contains Transmitter Module FCC ID: XPY2AGQN4NNN or XPYUBX18ZO01, QOQBT121
IC: 324C-10214785
Contains Transmitter Module IC: 8595A-2AGQN4NNN or 8595A-UBX18ZO01, 5123A-BGTBT121
Radio Power Frequency Range
Bluetooth ≤ 8.5 dBm 2.400 GHz - 2.4835 GHz
RFID ≤ 7 dBm 13.56 MHz
Cellular ≤ 23 dBm 699 MHz - 787 MHz
≤ 23 dBm 814 MHz - 862 MHz
≤ 33 dBm 824 MHz - 850 MHz
≤ 33 dBm 880 MHz - 915 MHz
≤ 30 dBm 1.710 GHz - 1.785 GHz
≤ 30 dBm 1.850 GHz - 1.980 GHz
To access the FCC and ISED on the ALTAIR io 4:
(1) Navigate to the Menu.
(2) Select the Device Info option.
(3) Select Regulatory and Legal Info.
2.4 Ingress Protection (IP)
IP ratings do not imply that the equipment will detect gas during and after exposure to those conditions.
Follow the recommendations as described in the ALTAIR io 4 User Guide (P/N 10225884) to determine appropriate
calibration interval and maintenance requirements if exposed to conditions representative of the IP Rating.
The IP rating is self-declared by MSA.
2.5 Charging
Do not charge the device in hazardous areas, as it may create a risk of explosion.
5 ALTAIR io 4
2 Notices
US
To Next Page
Loading...
Need help?
General
