US
Storage and Product Lifetime
V-Gard
®
H1 Safety Helmet
8
6 Storage and Product Lifetime
Heat, cold, chemicals, and sunlight
have an effect on the electrical and
mechanical properties of this helmet.
V-Gard H1 Safety Helmets have a
service life of 5 years, in addition to
storage time. Helmets can be kept in
storage for up to 2 years. MSA recommends that you record the date of initial use on the label inside
the helmet.
7 Accessories
WARNING!
Use only MSA V-Gard H1 Safety Helmet accessories with MSA protective helmets to be in compliance
with the applicable safety standards. Only V-Gard H1 accessory products are tested and approved as
a fully integrated system with this helmet. Although non-MSA accessories may look as if they are effec-
tive on MSA helmets, MSA has evaluated only MSA helmet accessories.
Failure to obey this warning can result in serious injury or death.
Contact MSA for a full range of accessories that are available from your local MSA partners: eye and
face protection, hearing protection, chin straps, sweat bands, winter liners, and neck capes. Install
approved accessories according to the manufacturers' recommendations. Information about how to
install an accessory on the helmet is available in the applicable accessory manual.
95°F
(35°C)
41°F
(5°C)
To Next Page
