MSI 760GM-P31 Series - Page 57

BIOS Setup ▍
MS-7623
3-21
BIOS Setup ▍
MS-7623
AMD Cool’n’Quet
The Cool’n’Quet technology can e󰘯ectvely and dynamcally lower CPU speed and
power consumpton.
C1E Support
To enable ths tem to red the CPU power consumpton
whle dle. Not all porcessors support Enhanced Halt
tate (C1E).
Important
To ensure that Cool’n’Quet functon s actvated and
wll be workng properly, t s requred to double con󰘰rm
that:
Run BIOS Setup, and select Cell Menu. Under Cell
Menu, 󰘰nd AMD Cool’n’Quet, and set ths tem to
“Enabled”.
Enter Wndows, and select [Start]->[Settngs]->[Control Panel]->[Power Optons].
Enter Power Optons Propertes tag, and select Mnmal Power Management under
Power schemes.
Adjust CPU FSB Frequency (MHz)
Ths tem allows you to select the CPU Front Sde Bus clock frequency (n MHz).
OC Steppng
Ths tem wll be enabled after you set the overclockng frequency n the “Adjust CPU
Base Frequency (MHz)”. And the followng tems wll appear. Ths tems wll help the
system to overclock step by step after system bootng up.
Start OC Steppng From (MHz)
Ths tem s used to set the ntal base clock. The system wll boot wth the ntal base
clock, and start to overclock from ntal base clock to set base clock that you set n
“Adjust CPU Base Frequency (MHz)” step by step.
OC Step
Ths tem s used to set how many steps for base colck overclockng.
OC Step Count Tmer
Ths tem s used to set the bu󰘯er tme for every step.
Adjust CPU Rato
Ths tem s used to adjust CPU clock multpler (rato). It s avalable only when the
processor supports ths functon.
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency. Read-only.
Adjust CPU-NB Rato
Ths tem s used to adjust CPU-NB rato.
Adjusted CPU-NB Frequency (MHz)
It shows the adjusted CPU-NB frequency. Read-only.
▶
▶
•
•
▶
▶
▶
▶
▶
▶
▶
▶
▶