MSI 845 Ultra - Advanced BIOS Features

Chapter 3
3-8
Advanced BIOS Features
Quick Boot
Setting the item to Enabled allows the system to boot within 5 seconds since
it will skip some check items. Available options: Enabled and Disabled.
Full Screen Logo Show
This item enables you to show the company logo on the bootup screen. Set-
tings are:
Disabled Shows the POST messages at boot.
Enabled Shows a still image (logo) on the full screen at boot.
1st/2nd/3rd Boot Device
The items allow you to set the sequence of boot devices where AMIBIOS
attempts to load the operating system. The settings are:
IDE-0 The system will boot from the first HDD.
IDE-1 The system will boot from the second HDD.
IDE-2 The system will boot from the third HDD.
IDE-3 The system will boot from the fourth HDD.
Floppy The system will boot from floppy drive.
ARMD-FDD The system will boot from any ARMD device, such