3-26
MS-6743 M-ATX Mainboard
Resume By Alarm
The field is used to enable or disable the feature of booting up the system on
a scheduled time/date.
Date(of Month) Alarm
The field specifies the date for Resume By RTC Alarm. Settings: 0~31.
Time(hh:mm:ss) Alarm
The field specifies the time for Resume By RTC Alarm. Format is <hour>
<minute><second>.
**Reload Global Timer Events**
Primary/Secondary IDE 0/1, FDD, COM, LPT Port, PCI PIRQ [A-D] #
The global timer is the hardware timer that counts down to the power
saving modes. If the monitoring of the listed hardware peripherals or
components is enabled, the activity of the specified peripherals or compo-
nents will awaken the system or reload the original count of global timer
when they are accessed.
MSI Reminds You...
If you have changed this setting, you must let the system boot up
until it enters the operating system, before this function will work.
To Next Page
Loading...
