Using 2-, 4- or 6-Channel Audio Function
A-19
4-Channel Analog Audio Output
The audio jacks on the back panel always provide 2-channel analog audio
output function, however these audio jacks can be transformed to 4- or 6-
channel analog audio jacks by selecting the corresponding multi-channel op-
eration from No. of Speakers.
Refer to the following diagram and caption for the founction of each jack on the
back panel when 4-Channel Mode is selected.
* Line In function is converted to Line Out function when 4-Channel Mode
for 4-Speaker Output is selected.
Back Panel
*
1 MIC
2 Line Out (Rear channels)
3 Line Out (Front channels)
3
1
2
To Next Page
Loading...
