MSI 870S-G46 series - Page 57

3-20 3-21
BIOS Setup
MS-7599
Chapter 3
3-20 3-21
BIOS Setup
MS-7599
Chapter 3
OC Dal Functon
Ths tem allows you to enable/dsable the OC Dal functon. Settng to [Enable] act
-
vates the followng 󰘰elds, and use the followng 󰘰elds to set each OC Dal functon.
OC Dal Step
Ths tem s used to set value of each step when you rotate the OC dal knob.
OC Dal Reset
Select [Reset] f you need to reset the OC Dal Value.
OC Dal Value
Ths tem ndcates the overclockng value by OC dal functon. When you rotate the OC
dal knob, ths value wll change.
OC Dal Adjusted FSB Clock (MHz)
It shows the adjusted FSB clock by OC Dal functon (FSB Clock +OC Dal Value).
Read-only.
Memory-Z
Press <Enter> to enter the sub-menu and the followng screen appears.
DIMM1~4 Memory SPD Informaton
Press <Enter> to enter the sub-menu and the followng screen appears. Ths sub-
menu dsplays the nformaton of nstalled memory.
Advance DRAM Con󰘰guraton
Press <Enter> to enter the sub-menu and the followng screen appears.
DRAM Tmng Mode
Ths 󰘰eld has the capacty to automatcally detect all of the DRAM tmng.
DRAM Drve Strength
Ths tem allows you to control the memory data bus’ sgnal strength. Increasng the
drve strength of the memory bus can ncrease stablty durng overclockng.
DRAM Advance Control
Ths 󰘰eld has the capacty to automatcally detect the advanced DRAM tmng.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶