5-4
MS-7033 M-ATX Mainboard
2. Audio Jack
This part shows the audio jack on your mainboard and indicates each function.
(1) Rear Panel
The audio configuration shown here should be identical to the audio jacks on your
mainboard. Follow the indication on it to connect the audio output devices correctly.
A. Blue connector. Click the icon in the left side and you can bring up two options
to choose: “Line Input Audio Device” and “Unused/Undefined”. The connector’s
function depends on your selection.
B. Green connector. Click the icon in the left side and you can bring up two
options to choose: “Front Speaker (L/R)” and “Unused/Undefined”. The connec-
tor’s function depends on your selection.
A----
B----
C----
----D
----E
----F
To Next Page
Loading...
