Introduction to CMI9880L Audio Codec
5-7
4. DSP Mode: Enabled
This part provides an advanced, amazing and considerate feature-dynami-
cally adjustable multi-channel sound system no matter what listening appliance you
are using and what application you are running.
Click the speaker icon next to the DSP Mode and click
the 7.1 Virtual SPEAKER SHIFTER button, or click the 7.1 Virtual
SPEAKER SHIFTER button directly to enable this function, then all the speakers are
available to adjust.
You may move all the virtual speakers to anywhere. Center is usually for
Voice in DVD and just suitable to move in vertical to keep the sound in the center.
Subwoofer signal is directionless low-frequency sound to human ears. Thus, please
move it horizontally to express strength or weakness.
Toolbar of DPS Mode
<1> <2> <3> <4> <5>
<1> Rotate all the virtual speakers clockwise.
<2> Rotate all the virtual speakers anti-clockwise.
<3> Move all the virtual speakers clockwise/anti-
clockwise manually.
<4> Move individual virtual speaker randomly.
<5> Reset the change to the default setting.
To Next Page
Loading...
