MSI 970A-G43 Series - Page 45

En-33
Englsh
HT Lnk Control
Press <Enter> to enter the sub-menu.
HT Incomng/ Outgong Lnk Wdth
These tems allow you to set the Hyper-Transport Lnk wdth. Settng to [Auto], the
system wll detect the HT lnk wdth automatcally.
DRAM Voltage/ SB Voltage/ NB Voltage/ CPU Voltage/ CPU-NB Voltage
These tems are used to adjust the voltage of CPU, Memory and chpset.
Spread Spectrum
Ths functon reduces the EMI (Electromagnetc Interference) generated by modulatng
clock generator pulses.
Important
If you do not have any EMI problem, leave the settng at [Dsabled] for optmal system
stablty and performance. But f you are plagued by EMI, select the value of Spread
Spectrum for EMI reducton.
The greater the Spread Spectrum value s, the greater the EMI s reduced, and the
system wll become less stable. For the most sutable Spread Spectrum value, please
consult your local EMI regulaton.
Remember to dsable Spread Spectrum f you are overclockng because even a slght
jtter can ntroduce a temporary boost n clock speed whch may just cause your
overclocked processor to lock up.
Overclockng Pro󰘰les
Press <Enter> to enter the sub-menu.
Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6
Press <Enter> to enter the sub-menu.
Set Name for Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6
Gve a name by typng n ths tem.
Save Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6
Save the current overclockng settngs to ROM for selected pro󰘰le.
Load/ Clear Overclockng Pro󰘰le 1/ 2/ 3/ 4/ 5/ 6
Load/ Clear the stored pro󰘰le settngs from ROM.
Overclockng Pro󰘰le Save
Save the current overclockng settngs to USB 󰘱ash dsk.
Overclockng Pro󰘰le Load
Load the stored settngs from USB 󰘱ash dsk.
MEMORY-Z
Press <Enter> to enter the sub-menu. Ths sub-menu hghlghts all the settngs and
tmngs of your DIMMs. Ths nformaton wll vary by model and s read-only. You can
also access ths nformaton at any tme by pressng [F5]. Press <Enter> to enter the
sub-menu.
▶
▶
▶
▶
•
•
•
▶
▶
▶
▶
▶
▶
▶
▶