MSI 970A-G46 Series - Security

BIOS Setup
MS-7693
Chapter 2
2-21
BIOS Setup
MS-7693
Chapter 2
SECURITY
Admnstrator Password
Set the admnstratve password that wll be requred to enter the BIOS.
User Password
Set the user password that wll be requred to enter the operatng system.
Important
When selectng the Admnstratve / User Password tems, a password box wll appear
on the screen. Type the password then press <Enter>. The password typed now wll re-
place any prevous set password from CMOS memory. You wll be prompted to con󰘰rm
the password. You may also press <Esc> to abort the selecton.
To clear a set password, press <Enter> when you are prompted to enter a new pass-
word. A message wll con󰘰rm the password s beng dsabled. Once the password s
dsabled, you can enter the setup and OS wthout authorzaton.
U-Key
Enable or dsable USB drver devce as key. Ths requres the USB devce to be plugged
n for access to the computer..
Make U-Key at
When the “U-Key” as sets to [Enabled], ths tem s selectable. Ths tem allows you to
specfy the USB drve.
Chasss Intruson Con󰘰guraton
Press <Enter> to enter the sub-menu.
Chasss Intruson
Enables or dsables the feature of recordng the chasss ntruson status and ssung
a warnng message f opened. To clear the warnng logs, set the 󰘰eld to [Reset]. The
settng of the 󰘰eld wll return to [Enabled] later.
▶
▶
▶
▶
▶
▶