MSI 970A - Managing Logical Drives

85
RAID Configuration
9. Delete all logical drivers by selecting Logical Driver Main Menu > Logical Driver
Delete Menu.
+ Logical Drive Main Menu
+ Logical Drive List Menu
+ Logical Drive Create Menu
+ Logical Drive Delete Menu
10. Make sure there are not any logical drivers (as shown below).
+ Logical Drive Delete Menu
- <Not Found Any Logical Drive>
11. Back to Logical Driver Main Menu and select Logical Driver Create Menu.
+ Logical Drive Main Menu
+ Logical Drive List Menu
+ Logical Drive Create Menu
+ Logical Drive Delete Menu
12. Select Usable Physical Drive List.
+ Logical Drive Create Menu
+ Usable Physical Drive List
+ Basic Setting
- Raid Mode : <RAID 0>
- Stripe Block (KB) : <64>
- Initialization : <Fast>
- Gigabyte Boundary : <Enable>
- Read Policy : <Read Ahead>
- Write Policy : <Write Back>
- Ld Name : _
+ Ld Size Setting
13. Choose RAID member disks by pressing arrow key and space key.
+ Logical Drive Create Menu
- Hxxxxxx HD12345678 | 1500.30 GB [x]
- Wxx HD34567890 | 3000.59 GB [x]