Chapter 3
3-16
BIOS Setup
MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory.
CPU Features
Press <Enter> to enter the sub-menu.
AMD Cool’n’Quiet [Auto]
Enabled or disabled AMD Cool’n’Quiet function.
[Auto] Depends on AMD Design.
[Enable] Enables AMD Cool’n’Quiet function. The Cool’n’Quiet technology
consumption.
[Disabled] Disables this function.
Important
When adjusting CPU Ratio, the Cool’n’Quiet function will be disabled automatically.
For CPU which supports the Turbo Core Tech., please set AMD Turbo Core
Technology and AMD Cool’n’Quiet as Disabled to retain the default CPU core speed.
C1E Support
Enables this item to reduce the CPU power consumption while idle. Not all
processors support Enhanced Halt state (C1E).
SVM Mode [Enabled]
operating systems in independent partitions. The system can
function as multiple systems virtually.
[Disabled] Disables this function.
IOMMU Mode
Core C6 State
This item allows you to enable/ dsiable C6 state support. When the CPU enters C6
Wake up the CPU from C6 state will take a lot longer.
To Next Page
Loading...
