5. Locate the CPU fan connector on the motherboard.
6. Position the cooling set onto the retention mechanism. Hook one end of the clip to
hook rst.
Important
•
While disconnecting the Safety Hook from the xed bolt, it is necessary to keep an
eye on your ngers, because once the Safety Hook is disconnected from the xed
bolt, the xed lever will spring back instantly.
•
Conrm that the CPU cooler has formed a tight seal with the CPU before booting
your system.
•
Please refer to the documentation in the APU cooler package for more details about
CPU cooler installation.
CPU fan connector
7. Then press down the other end of the clip to fasten the cooling set on the top of
the retention mechanism. Locate the Fix Lever and lift up it.
8. Fasten down the lever.
9. Attach the CPU Fan cable to the CPU fan connector on the motherboard.
To Next Page
Loading...
