MSI A88XM GAMING - Page 68

Chapter 3
3-8BIOS Setup
SATA Mode [AHCI Mode]
Sets the operation mode of the onboard SATA controller. The default mode is
AHCI.
[Disabled] Disables the SATA function.
[IDE Mode] Specify the IDE mode for SATA storage devices.
[AHCI Mode] Specify the AHCI mode for SATA storage devices. AHCI (Advanced
Host Controller Interface) o󰘯ers some advanced features to enhance
the speed and performance of SATA storage device, such as Native
Command Queuing (NCQ) and hot-plugging.
[RAID Mode] Enables RAID function for SATA storage devices.
SATAX Hot Plug [Disabled]
Allows user to enable or disable the SATA hot plug support. This item will appear
when the “SATA Mode” set to [AHCI]/ [RAID].
[Enabled] Enables hot plug support for the SATA ports.
[Disabled] Disables hot plug support for the SATA ports.
HD Audio Controller [Enabled]
Enables or disables the onboard High De󰘰nition Audio controller.
HPET [Enabled]
Enables or disables the HPET (High Precision Event Timers) support.
Integrated Graphics Con󰘰guration
Adjusts integrated graphics settings for optimum system. Press <Enter> to enter the
sub-menu.
Initiate Graphic Adapter [PEG]
Selects a graphics adapter as the primary display device.
[IGD] Integrated Graphics Display.
[PEG] PCI-Express Graphics Device.
Initiate Graphics Devices [Auto]
Enables or disables the integrated graphics controller.
[Auto] This setting will be con󰘰gured automatically according to the
installed APU.
[Disabled] Disables integrated graphics controller.
[Dual Graphics] Enables the integrated graphics controller multi-monitor support
for independent graphics card.
Important
The "Initiate Graphics Devices" must be set to "Dual Graphics" befor using AMD Dual
Gaphics Technology.
Integrated Graphics Share Memory [Auto]
Selects a 󰘰xed amount of system memory allocated to the graphics. This item
de󰘰nes the exact memory size shared to the graphics. This item will appear when
“Initiate Graphics Devices” is set to "Dual Graphics".
▶
▶
▶
▶
▶
▶
▶
▶