MSI Bg Bang-XPower II

2-8
BIOS Setup
MS-7737
Chapter 2
BIOS Setup
MS-7737
Chapter 2
Wake Up Event By
Settng to [BIOS] actvates the followng 󰘰elds, and use the followng 󰘰elds to set the
wake up events. Settng to [OS], the wake up events wll be de󰘰ned by OS.
Resume By RTC Alarm
The 󰘰eld s used to enable or dsable the feature of bootng up the system on a
scheduled tme/date.
Date/ HH:MM:SS
If Resume By RTC Alarm s set to [Enabled], the system wll automatcally resume
(boot up) on a spec󰘰c date/hour/mnute/second spec󰘰ed n these 󰘰elds (usng the
<+> and <-> to select the date & tme settngs).
Resume By PCI or PCI-E Devce
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PCI or PCIe devce.
Resume By Onboard LAN
Ths tem determne whether the system wll be awakened from what power savng
modes when nput sgnal of LAN s detected.
Resume From S3 by USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus
-
pend to RAM) sleep state.
Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard
These tems determne whether the system wll be awakened from what power sav
-
ng modes when nput sgnal of the PS/2 mouse/ keyboard s detected.
Boot
Full Screen Logo Dsplay
[Enabled] The OS boots straght to the GUI wthout showng the POST screen,
[Dsabled] Shows the POST messages at boot.
== Boot Opton Prortes==
1st~8th Boot
These tems are used to prortze the nstalled boot devces.
CD/DVD ROM Drve BBS Prortes/ USB KEY Drve BBS Prortes/ UEFI Boot Drve
BBS Prortes
1st~8th Boot
These tems are used to prortze the nstalled CD/DVD ROM/ USB key drves/ UEFI
boot drves.
Save & Ext
Dscard Changes and Ext
Use ths tem to abandon all changes and ext setup.
Save Changes and Reset
Use ths tem to save changes and reset the system.
Save Changes
Use ths tem to save changes.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶