29
BIOS Setup
CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the
[Enabled] The system will issue a warning message during boot and then you
have to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
Press <Enter> to enter the sub-menu. This sub-menu displays the information of
[F4]. Read only.
CPU Technology Support
Press <Enter> to enter the sub-menu. The sub-menu shows the key features of
MEMORY-Z
Press <Enter> to enter the sub-menu. This sub-menu displays all the settings and
timings of installed memory. You can also access this information menu at any time by
pressing [F5].
DIMM4 Memory SPD
Press <Enter> to enter the sub-menu. The sub-menu displays the information of
installed memory. Read only.
CPU Features
Press <Enter> to enter the sub-menu.
Hyper-Threading [Enabled]
Intel Hyper-Threading technology treats the multi cores inside the processor as
the system performance is highly improved. This item appears when the installed
[Enable] Enables Intel Hyper-Threading technology.
[Disabled] Disables this item if the system does not support HT function.
Active Processor Cores [All]
Limit CPUID Maximum [Disabled]
problems with older operating system that do not support the
To Next Page
Loading...
