MSI B150M PRO-VDH - Page 37

27
BIOS Setup
▶Package C State limit [Auto]
This item allows you to select a CPU C-state level for power-saving when system is
idle. This item appears when Intel C-State is enabled.
[Auto] This setting will be con󰘰gured automatically by BIOS.
[C0~C8] The power-saving level from high to low is C8 to C0.
▶CFG Lock [Enabled]
Lock or un-lock the MSR 0xE2[15], CFG lock bit.
[Enabled] Locks the CFG lock bit.
[Disabled] Un-locks the CFG lock bit.
▶EIST [Enabled]
Enables or disables the Enhanced Intel
®
SpeedStep Technology. This item will
appear when OC Explore Mode is set to Normal.
[Enabled] Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and
average heat production.
[Disabled] Disables EIST.
▶Intel Turbo Boost [Enabled]
Enables or disables the Intel
®
Turbo Boost. This item is for Simple mode and
appears when a CPU that support Turbo Boost is installed.
[Enabled] Enables this function to boost CPU performance automatically over
speci󰘰cation when system request the highest performance state.
[Disabled] Disables this function.
▶Long Duration Power Limit (W) [Auto]
Sets the long duration TDP power limit for CPU in Turbo Boost mode.
▶Long Duration Maintained (s) [Auto]
Sets the maintaining time for Long duration power Limit(W).
▶Short Duration Power Limit (W) [Auto]
Sets the short duration TDP power limit for CPU in Turbo Boost mode.
▶CPU Current Limit (A) [Auto]
Sets maximum current limit of CPU package in Turbo Boost mode. When the
current is over the speci󰘰ed value, the CPU will automatically reduce the core
frequency for reducing the current.
▶DMI Link Speed [Auto]
Sets DMI speed.