10
Rear I/O Panel
∙ Device Selection
options. The check sign indicates the devices as default.
∙ Application Enhancement
guidance of anticipated sound effect for both output and input device.
∙ Main Volume
that you plugged in front or rear panel by adjust the bar.
∙ Jack Status
computer.
∙ Connector Settings
Audio 7.1-channel Configuration
connector and follow the below steps.
1. Click on the Realtek Audio Console > Device advanced settings to open the dialog
below.
2. Select Mute the rear output device, when a front headphone plugged in.
3. Plug your speakers to audio jacks on rear and front I/O panel. When you plug a
device into an audio jack, a dialogue window will pop up asking you which device is
current connected.
⚠
Important
The pictures above for reference only and may vary from the product you purchased.
To Next Page
Loading...
