CX623（MS-168A）Disassemble Guide
9、 LCD MODULE ASSY
9.9：Remove the 8 screws (M2*3mm).
Attention: the screw driver torque is 1.5-2.0Kgf-cm
Component P/N Qty
Display Module S1J-642G011-S02 1
LCD BRACKET-L E2M-6820411-A89 1
LCD BRACKET-R E2M-6820311-A89 1
Screw E43-1203003-G68 8
9.10：Remove the CMOS camera module
according to the sequence as pic shows.
9.11：Remove the coaxial cable(Camera Cable).
Component P/N Qty
INT Coaxial Cable K10-3006073-H39 1
Camera Module S1F-0001590-AH3 1
To Next Page
Loading...
