GT60（MS-16F3）Disassembly Guide
8、UPPER CASE ASSY
8.1：Remove 1 screw (M2*3mm), then remove the
T/P board.
Attention: the screw driver torque is 1.5-2.0Kgf-cm
Component P/N Qty
screw E43-1203003-H29 1
Touchpad board .607-16F3D-01S 1
Upper Case 07-6F3C211-Y31 1
8.2：Release the connector that stabilize the T/P
Cable, then remove the T/P module.
Component P/N Qty
Touchpad Module S78-3700650-SD2 1
To Next Page
Loading...
