RapidStart Display Type [BIOS Save/Restore]
Selects the screen type of Intel Rapid Start Display.
[BIOS Save/Restore] The BIOS POST splash screen will be saved/ restored.
[DeskTop Save/Restore] The desktop image will be saved/ restored.
LakeTiny Feature [Disabled]
Enables or disables Intel Lake Tiny feature with iRST for SSD. This item appears
when a installed CPU supports this function and "Intel C-State" is enabled.
[Enabled] Enhance the dynamic IO load adjusted performance for accelerating
the SSD speed.
[Disabled] Disables this feature.
Sets the onboard USB controller and device function. Press <Enter> to enter the sub-
menu.
USB Controller [Enabled]
Enables or disables all USB controller.
XHCI Hand-off [Enabled]
EHCI Hand-off [Enabled]
Legacy USB Support [Enabled]
Sets Legacy USB function support.
[Auto] The system will automatically detect if any USB device is connected
and enables or disables the legacy USB support.
[Enabled] Enable the USB support for legacy operating systems that do not
support USB.
[Disabled] The USB devices are available only for UEFI applications.
Sets system Super I/O chip parameters including LPT and COM ports. Press <Enter>
to enter the sub-menu.
Serial (COM) Port 0 Configuration
menu.
Serial (COM) Port 0 [Enabled]
Enables or disables serial (COM) port 0.
Serial (COM) Port 0 Settings [Auto]
automatically or you can set it manually.
Parallel (LPT) Port Configuration
menu.
Parallel (LPT) Port [Enabled]
Enables or disables parallel(LPT) port.
To Next Page
Loading...
