3-13 BIOS Setup
Parallel (LPT) Port Settings [Auto]
automatically or you can set it manually.
Device Mode [Printer Mode]
Selects an operating mode for parallel port.
[Printer Mode] Printer port mode
[SPP] Standard Parallel Port mode
[EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard
Parallel Port mode.
[ECP] Extended Capability Port mode
[ECP + EPP-1.9/ 1.7] Extended Capability Port mode + Enhanced Parallel
Port-1.9/ 1.7 mode.
sleep mode. Press <Enter> to enter the sub-menu.
Intel(R) Smart Connect Technology [Enabled]
Enables or disables Intel(R) Smart Connect Technology. This feature can update
applications (ex. email and social networks) by periodically waking your system from
sleep mode. And you do not need to wait for the applications to update when you
wake up the system.
[Enabled] Enables Intel smart connect technology.
[Disabled] Disables Intel smart connect technology.
Power Management Setup
Sets system Power Management of EuP2013 and AC Power Loss behaviors. Press
<Enter> to enter the sub-menu.
EuP 2013 [Disabled]
Enables or disables the system power consumption according to EuP2013 regula-
tion.
-
ulation.
[Disabled] Disables this function.
PCIe devices.
Restore after AC Power Loss [Power Off]
Sets the system behaviors while encountering the AC power loss.
[Power On] Boot up the system after restoring AC power.
before AC power loss.
To Next Page
Loading...
