3-11
BIOS Setup
Advanced Chipset Features
System Performance
This item specifies the system performance status. Set to Turbo to enhance the
system performance, or set to Fast for regular system performance. Setting
options: Fast, Turbo.
LDT to AGP Lokar (Upstream) / LDT to AGP Width (Downstream)
These two item control the utilized widths of the HyperTransport link. Setting
options: 8 bit, 16 bit.
LDT to AGP Lokar Frequency
This item specifies the maximum operating frequency of the link's transmitter
clock. Setting options: Auto, 800 MHz, 600 MHz, 400 MHz, 200 MHz.
Memclock Mode / Memclock Value
When it is set to Manual in “Memclock Mode”, user can place an artificial
memory clock limit on the system. Please note that memory is prevented from
running faster than this frequency. Setting options: DDR200, DDR266,
DDR300, DDR333, DDR400.
MSI Reminds You...
Change these settings only if you are familiar with the chipset.
To Next Page
Loading...
