MS-7390 Mainboard
B-16
View Storage Information
• You can use the Storage page to view the following storage information about
the hard drives in your system:
- Which RAID arrays are set up
- The process state of each array
- Which drives are configured for each RAID array in your system
- Which drives are designated as free disks
-Information about each drive, such as size and model
• You can also launch various Wizards-such as the Create Array Wizard, Delete
Array, and Migrate Array Wizard-from the list of links in the Related tasks
section of the side menu.
Instructions
Click View Storage Configuration to open the associated page.
The View Storage Configuration page provides the following information:
• Name: Indicates the RAID array type and drive model information
• Status: Indicates the process state of the array.
For example, "Healthy", "Rebuilding", "Initializing", "Synchronizing", or "Upgrad-
ing"
• Capacity: Indicates the size of each hard drive.
For example, "250 GB"
• Channel: Indicates the adapter and channel (SATA port) information for each
hard drive.
For example, "1.0." means the hard drive is attached to Adapter 1, Channel 0.
To Next Page
Loading...
