17
1st Level Menu 2nd Level Menu Description
Power Button OFF ∙ When set to OFF, users can press the power button to
turn off the monitor.
Standby ∙ When set to Standby, users can press the power button
to turn off the panel and backlight.
Info. On Screen OFF ∙ The information of the monitor status will be shown on
the right side of the screen.
ON
HDMI™ 2.1 Console ∙ To reach maximum resolution of 3840x2160 @160 Hz,
users have to set HDMI™ 2.1 to PC.
PC
HDMI™ CEC OFF ∙ HDMI™ CEC (Consumer Electronics Control) supports
Sony PlayStation®, Nintendo® Switch™, Xbox Series
X|S consoles and various audio-visual devices that are
CEC-capable.
∙ If HDMI™ CEC is set to ON:
∙ The monitor will automatically power on when the CEC
device is turned on.
∙ The CEC device will enter power saving mode when the
monitor is turned off.
∙ When Sony PlayStation®, Nintendo® Switch™, or Xbox
Series X|S console is connected, Game Mode and Pro
Mode will be automatically set to default modes and
can be adjusted to users’ preferred modes later.
ON
Type C PD Charge OFF ∙ Type C PD Charge enables users to charge their
devices through a USB Type-C connector, which can
deliver up to 90W (20V/4.5A).
ON
Reset YES ∙ Users can Reset and restore settings to original OSD
Default in any mode.
NO
To Next Page
Loading...
