MSI MAG X670E TOMAHAWK WIFI - Page 33

31
Installing M.2 module into M2_1 slot
1. Loosen the screws of M.2 Shield Frozr heatsink.
2. Lift the M.2 Shield Frozr heatsink up and remove it.
11
11
22
3. Remove the protective films from the M.2 thermal pads on the M.2 plate.
4. If you install 22110 SSD, remove the EZ M.2 Clip kit from the M.2 plate and then
install the supplied M.2 plate screw on the M.2 plate. Skip this step if you install
2280 SSD.
44