15
OSD Menus
1st Level Menu 2nd Level Menu Description
Transparency 0~5 ∙ Users can adjust Transparency in any
mode.
OSD Time Out 5~30s ∙ Users can adjust OSD Time Out in any
mode.
RGB LED OFF ∙ Users can adjust RGB LED to ON or OFF.
ON
Power Button OFF ∙ When set to OFF, users can press the
power button to turn off the monitor.
Standby ∙ When set to Standby, users can press the
power button to turn off the panel and
backlight.
Info. On Screen OFF ∙ The information of the monitor status will
be shown on the right side of the screen.
ON
DP
OverClocking
OFF ∙ To achieve maximum resolution of
1920x1080 @170Hz, users have to set DP
OverClocking to ON.
ON
HDMI CEC OFF ∙ HDMI CEC (Consumer Electronics Control)
supports Sony PlayStation®, Nintendo®
Switch™, Xbox Series X|S consoles and
various audio-visual devices that are CEC-
capable.
∙ If HDMI CEC is set to ON:
•The monitor will automatically power on
when the CEC device is turned on.
•The CEC device will enter power saving
mode when the monitor is turned off.
•When Sony PlayStation®, Nintendo®
Switch™, or Xbox Series X|S console is
connected, Game and Pro Mode will be
automatically set to User mode (Default)
and can be adjusted to users’ preferred
modes later.
ON
Reset YES ∙ Users can Reset and restore settings to
original OSD Default in any mode.
NO
To Next Page
Loading...
