11
OSD Menus
1st Level Menu 2nd/3rd Level Menu Description
Anti Motion
Blur
OFF ∙ When Anti Motion Blur is enabled,
HDCR and Brightness cannot be
enabled and will be grayed out.
∙ Response time will be grayed out
while Anti Motion Blur is enabled.
∙ Anti Motion Blur has to be disabled
while Adaptive-Sync is set to ON.
ON
Refresh Rate Location Left Top ∙ Users can adjust Refresh Rate in any
mode.
∙ Default Refresh Rate Location is
Left Top. Location is adjustable in
OSD Menu. Press the OK Button to
confirm and apply your Refresh Rate
Location.
∙ This monitor follows and works at the
Operating System’s preset Screen
Refresh Rate.
Right Top
Left
Bottom
Right
Bottom
OFF
ON
Alarm Clock Location Left Top ∙ Users can adjust Alarm Clock in any
mode.
∙ After setting the time, press the OK
Button to activate the timer.
∙ Default Alarm Clock Location is
Left Top. Users can select their own
location.
Right Top
Left
Bottom
Right
Bottom
Customize
OFF
15:00 00:01 ~
99:59
30:00
45:00
60:00
Screen
Assistance
None ∙ Users can adjust Screen Assistance
in any mode.
∙ Screen Assistance default is None.
Icon
Position
Reset
To Next Page
Loading...
