All specifications and informations are subject to change without notice.
-3-
III. Connect the Monitor to PC
(The above pictures are for illustration only and the physical accessories shall govern.)
Before connecting the LCD monitor to the PC, please power down the PC and
the monitor.
* Warning: Always use the power
cord of standard configuration.
All specifications and informations are subject to change without notice.
-2-
II.Installation Instructions
1.Accessories
Power adapter
Signal cable
User manual
Base/Stand
Warranty card
(The above pictures are for illustration only and the physical accessories shall govern.)
2. Adjustment of Rotation Angle
(The above pictures are for illustration only and the physical accessories shall govern.)
3. Project Assembly
See the assembly sketch on the cover of the packaging case.
Power adapter
1. The screen may be inclined 5°
forward and 20°backward.
2.
and right within -30°-30°.
The angle may be adjusted left
3. Vertical direction can be adjusted
up and down within 65mm.
4.
display, be sure not to touch or
press the screen area.
When adjusting the angle of the
2
4
3
DVI Port
Connect the DVI cable into the DVI IN port
in the back of the monitor (this needs the
support of the monitor).
HDMI Port
Connect the HDMI cable into the HDMI IN
port into the back of the monitor (this needs
the support of the monitor).
DP Port
Connect the DP cable into the DP IN port of
the monitor (this needs the support of the
monitor).
Audio Interface
Connect the AUDIO cable to the AUDIO out
port in the back of the display (this needs the
support of the monitor).
Power Plug
Connect the power cord of the monitor into
the POWER port in the back of the monitor.
1
5
2 43
1
5