MSI Optix MAG301CR2 (3CB4) - Page 24

2-9
OSD Setup
2-8
h Image
1st Level Menu 2nd/3rd Level Menu Description
Brightness 0-100 ■ Users can adjust Brightness in User, RTS,
RPG and Reader mode�
■ Brightness will be grayed out when Anti
Motion Blur and HDCR are enabled�
Contrast 0-100 ■ Users can adjust Contrast in any Mode�
Sharpness 0-5 ■ Users can adjust Sharpness in any Mode�
■ Sharpness improves clarity and details of
images�
Color
Temperature
Cool ■ Color Temperature default is Normal�
■ Use Up or Down Button to select and
preview mode e󰘯ects.
■ Press the Middle Button to con󰘰rm and
apply your mode type�
■ Users can adjust Color Temperature in
Customization mode.
Normal
Warm
Customization R (0-100)
G (0-100)
B (0-100)
Screen Size Auto ■ Users can adjust Screen Size in any mode,
any resolution and any screen refresh rate�
4:3
16:9
21:9
h Input Source
1st Level Menu 2nd Level Menu Description
HDMI1 N/A Users can adjust Input Source in any Mode�
HDMI2
DP
Type-c
Auto Scan
(OFF)
User can press “Navi Key Button” then select input
source at below status:
■ While “Auto Scan” was set to “OFF” and monitor at
power saving mode�
■ While “No Signal” message box is shown on monitor�
(ON)
h Navi Key
1st Level Menu 2nd Level Menu Description
Up
Down
Left
Right
OFF ■ Up Button default is Game Mode�
■ Down Button default is Screen Assistance�
■ Left Button default is Alarm Clock�
■ Right Button default is Input Source�
■ All Navi Key items can be adjusted via OSD
Menu�
Brightness
Game Mode
Screen Assistance
Alarm Clock
Input Source
Refresh Rate
Information On Screen