User’s Guide
33
Close an audio gateway connection:
If the connection was established via the Bluetooth icon in
the Windows system tray; click the Bluetooth icon, select
Quick Connect, Audio Gateway and then select the device
that is providing the service (active connections have a
checkmark in front of them).
or
No matter how the connection was created, in My Bluetooth
Places, right-click the service name and select Disconnect.
Configure
The Bluetooth Configuration Panel > Client Applications >
Audio Gateway > General tab provides options to configure:
The application name—to change it, highlight the
existing name and enter the new name.
Enable or disable secure connection. To enable secure
connection, place a checkmark in the box.
To Next Page
Loading...