6
Specifications
Continued from previous page
Internal
Connectors
∙ 1x 24-pin ATX main power connector
∙ 2x 8-pin ATX 12V power connectors
∙ 8x SATA 6Gb/s connectors
∙ 2x M.2 slots (M-Key)
∙ 1x USB 3.2 Gen2 Type-C port
∙ 2x USB 3.2 Gen1 connectors (supports additional 4 USB
3.2 Gen1 ports)
∙ 2x USB 2.0 connectors (supports additional 4 USB 2.0
ports)
∙ 1x 4-pin CPU fan connector
∙ 1x 4-pin Water Pump Fan connector (supports up to 2A)
∙ 4x 4-pin system fan connectors
∙ 1x Front panel audio connector
∙ 2x System panel connectors
∙ 1x Chassis Intrusion connector
∙ 1x 4-pin 5050 RGB LED connector
∙ 2x 3-pin ARGB LED connectors
∙ 1x 3-pin CORSAIR LED connector
∙ 1x Slow mode booting jumper
∙ 1x Power button
∙ 1x Reset button
Debug LED
∙ 4x EZ Debug LED
∙ 1x 2-Digit Debug Code LED
I/O Controller NUVOTON NCT6797 Controller Chip
Hardware Monitor
∙ CPU/System/Chipset temperature detection
∙ CPU/System/Chipset fan speed detection
∙ CPU/System/Chipset fan speed control
Form Factor
∙ ATX Form Factor
∙ 12 in. x 9.6 in. (30.4 cm x 24.4 cm)
Continued on next page
To Next Page
Loading...
