19
Overview of Components
⚠
Important
∙
Always insert a memory module in the DIMMB2 slot first.
∙
To ensure system stability for Dual/ Triple/ Quad channel mode, memory modules
must be of the same type, number and density.
∙
Some memory modules may operate at a lower frequency than the marked value
when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory
frequency if you want to operate the memory at the marked or at a higher frequency.
∙
It is recommended to use a more efficient memory cooling system for full DIMMs
installation or overclocking.
∙
The stability and compatibility of installed memory modules depend on installed
CPU and devices when overclocking.
∙
Please refer www.msi.com for more information on compatible memory.
DIMMB2
DIMMB2
DIMMC1
DIMMA2
DIMMD1
DIMMB1
DIMMC2
DIMMA1
DIMMD2
DIMMA2
DIMMD2
DIMMC2
To Next Page
Loading...
