31
Overview of Components
POWER1, RESET1: Power Button, Reset Button
The Power / Reset button allows you to power on / reset the computer.
POWER1
(Power button)
RESET1
(Reset button)
JSLOW1: Slow Mode Booting Jumper
This jumper is used for LN2 cooling solution, that provides the extreme overclocking
conditions, to boot at a stable processor frequency and to prevent the system from
crashing.
⚠
Important
∙
Users will try extreme low temperature overclocking at their own risks.
∙
The overclocking results will vary according to the CPU version.
∙
Please don’t set to Enabled when the system is off or it can’t be started.
Normal
(default)
Enabled
(Please enable this jumper
during BIOS POST.)
To Next Page
Loading...
