3-24
System Operations
▍
5. Select [Restore the system to factory default] to start the System Recovery
Function process; or select [EXIT] to restart the system.
6. The system recovery process will format your hard disk drive partition. Make
sure that the important data has been backed up before continuing the pro-
cess. Click [OK] to continue; click [Cancel] to stop the system recovery
process.
7. AC power is required while proceeding the System Recovery Function. As-
sure that the AC power is connected to the system before moving forward
to the next step.
8. DO NOT turn o the system power while performing the System Recovery
Function, or it may cause some unknown damage to the system.
To Next Page
Loading...
