MSI Z170A XPOWER GAMING TITANIUM EDITION - PEGSW1: Pcie Ceasefire Switch; J1: OC DASHBOARD Connector

33
Overview of Components
PEGSW1: PCIe CeaseFire Switch
The PCIe CeaseFire switch allows you to enable/ disable the PCIe slots conveniently
and directly.
Enable the PCIe slot
Disable the PCIe slot
ON
1 2 3
PCI_E1 slot
PCI_E3 slot
PCI_E5 slot
J1: OC DASHBOARD Connector
This connector allows you to connect the OC DASHBOARD with the dedicated OC
DASHBOARD cable.
Reset
OC DASHBOARD
BCLK+
Ratio+
Ratio-
GO2BIOS
OC DASHBOARD
Cable
Slow Mode
Reset
Power
Discharge
BCLK-
Using OC DASHBOARD
OC DASHBOARD provides buttons and switch for overclocking the motherboard. The
components of the OC DASHBOARD are described below.
● BCLK+, BCLK- - these buttons are used to increase or decrease the CPU base
clock.
● Reset - press the button to reboot the computer.
● Power - press the button to turn ON/OFF the computer.
● Discharge - allows you to discharge the motherboard to reset BIOS while the
computer is off.
● Ratio+, Ratio- - these buttons are used to increase or decrease the CPU ratio.
● Slow Mode - this switch is used for LN2 cooling solution, that provides the extreme
overclocking conditions, to boot at a stable processor frequency and to prevent the
system from crashing.
● GO2BIOS - press this button to enter BIOS Setup after reboot.