16
Specifications
Continued from previous page
Internal Connectors
∙ 1x 24-pin ATX main power connector
∙ 1x 8-pin ATX 12V power connector
∙ 1x 4-pin ATX 12V power connector
∙ 6x SATA 6Gb/s connectors
∙ 1x USB 3.2 Gen 1 5Gbps Type-C port
∙ 2x USB 3.2 Gen 1 5Gbps connectors (support additional 4
USB 3.2 Gen 1 5Gbps ports)
∙ 2x USB 2.0 connectors (support additional 4 USB 2.0 ports)
∙ 1x 4-pin CPU fan connector
∙ 1x 4-pin water pump connector
∙ 6x 4-pin system fan connectors
∙ 1x front panel audio connector
∙ 2x system panel connectors
∙ 1x Chassis Intrusion connector
∙ 1x Clear CMOS jumper
∙ 1x 4-pin RGB LED connector
∙ 2x 3-pin RAINBOW LED connectors
∙ 1x serial port connector
∙ 1x TPM module connector
∙ 1x TBT connector*
*Thunderbolt card need support RTD3
LED Features
∙ 1x EZ LED Control switch
∙ 4x EZ Debug LED
I/O Controller NUVOTON NCT6687 Controller Chip
Hardware Monitor
∙ CPU/System temperature detection
∙ CPU/System fan speed detection
∙ CPU/System fan speed control
Form Factor
∙ ATX Form Factor
∙ 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
BIOS Features
∙ 1x 256 Mb flash
∙ UEFI AMI BIOS
∙ ACPI 6.2, SM BIOS 3.2
∙ Multi-language
Continued on next page
To Next Page