MSI Z97-G45 GAMING - Page 47

English
En-35
CPU VRM Over Temperature Shutdown [Enabled]
Sets the system whether be powered o󰘯 or not when the CPU VRM temperature
over the limitation temperature of CPU VRM protection.
[Enabled] The system will be o󰘯 when over the speci󰘰ed temperature.
[Disabled] Disables this function.
Digital Compensation Level [Auto]
Sets the current compensation level for CPU PWM when the MOS phases are
changed. If set to "Auto", BIOS will con󰘰gure this setting automatically. Higher
compensation level provides more overclocking ability.
Imon Overwrite [Auto]
Sets the Imon current for CPU.
[Auto] This setting will be con󰘰gured automatically by BIOS.
[Quarter] Sets the Imon current into quarter.
[Half] Sets the Imon current into half.
[Disabled] Sets the default values for Imon current.
Transient Boost [Disabled]
Enables or disables the transient boost.
[Enabled] Enables this function may lead into a stable system under heavy load
-
ing.
[Disabled] Disables this function.
SVID Communication [Auto]*
Enables or disables SVID (Serial Voltage Identi󰘰cation) support.
[Auto] This setting will be con󰘰gured automatically by BIOS.
[Enabled] PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identi󰘰cation).
[Disabled] Disables SVID (Serial Voltage Identi󰘰cation) support.
VCCIN Voltage [Auto]
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is
shared with components of the CPU.
CPU Core Voltage/ CPU Ring Voltage/ CPU GT Voltage [Auto]
Sets the CPU Core/ Ring/ GT voltages. If set to "Auto", BIOS will set these voltages
automatically or you can set it manually.
CPU SA Voltage/ CPU IOA Voltage/ CPU IOD Voltage [Auto]
Sets the CPU SA/ IOA (IO Analog)/ IOD (IO Digital) voltages. If set to "Auto", BIOS will
set these voltages automatically or you can set it manually.
XXX Voltage [Auto]* (optional)
Sets the voltages related to memory/ PCH. If set to "Auto", BIOS will set the voltage
automatically or you can set it manually.
< Other Setting >
CPU Speci󰘰cations
Press <Enter> to enter the sub-menu. This sub-menu displays the information of in-
stalled CPU. You can also access this information menu at any time by pressing [F4].
Read only.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶