English
En-46
CPU Under Voltage Protection [Auto]
Sets the voltage limit for CPU under-voltage protection. If set to "Auto", BIOS will
may damage the system.
CPU Over Current Protection [Auto]
Sets the current limit for CPU over-current protection.
[Enhanced] Extends the limitation of CPU over-current protection.
CPU Switching Frequency [Auto]
range. Increasing the PWM working speed will cause higher temperature of
MOSFET. So please make sure a cooling solution is well-prepared for MOSFET
automatically.
CPU VRM Over Temperature Protection [Auto]
Sets the temperature limit on CPU VRM for over-temperature protection. The CPU
CPU Power Duty Control [Thermal Balance]
Selects the method of VRM control for CPU phase.
[Thermal Balance] Control the VRM with thermal balance mode.
[Current Balance] Control the VRM with current balance mode.
DRAM Phase Control [Auto]
Controls PWM phase proportionally to the DRAM loading. If set to "Auto", BIOS
[Disabled] Disables the PWM power phase switching feature.
DRAM Vdroop Offset Control [Auto]
DRAM Over Voltage Protection [Auto]
Sets the voltage limit for DRAM over-voltage protection. If set to "Auto", BIOS will
may damage the system.
DRAM Under Voltage Protection [Auto]
Sets the voltage limit for DRAM under-voltage protection. If set to "Auto", BIOS
may damage the system.
DRAM Over Current Protection [Auto]
Sets the current limit for DRAM over-current protection.
[Enhanced] Extends the limitation of memory over-current protection.
To Next Page
Loading...
