EasyManua.ls Logo

MSW MSW-GE70 - Page 33

MSW MSW-GE70
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
dry dipstick into the engine and after a few seconds unscrewing it again and
checking the oil level on the dipstick.
IMPORTANT: Do not overfill the engine oil - it can damage the engine! If
the oil level exceeds the permissible level, suck out the excess oil. Always
check the engine oil level with the engine off and cold or cooled.
Fill the tank with fuel - to do this unscrew the tank cap and fill the tank
taking care not to pour fuel over the maximum level indicator i.e. the red
line (see image below). Replace the filler cap by tightening it all the way.