Special keys: (hold while booting)
D: Disable other disk interfaces to get more free RAM.
P: Set MSX1 palette in MSX2.
S: Enable SCC/SCC+
R/F: Enable RAM expansion (when available).
W: Discard errors in write operations.
[BOOT KEYS]
There are some special keys to change the computer’s
configuration when booting.
[F5]: Swap video mode 50Hz <-> 60Hz
[F4]: Enable turbo mode. On turbo R it will enable the
R800. On some Panasonic machines it will enable the
turbo mode (5.37 MHz)
Bear in mind that the new configuration can be
changed again by the computer BIOS or the
game/software loaded in the cartridge.
To Next Page
Loading...