MTD 135-385A User Manual

Procedure for filling and preparing electric start model batteries before installation.

Steps to securely place and connect the battery in the mower's battery case.

Guidance on using the provided charger to recharge the mower battery.

Information on the ignition switch and throttle control for engine operation.

Instructions for using the gear shift lever and clutch pedal for transmission control.

Details on operating the brake pedal and brake lock mechanism.

Steps to adjust the mower deck to the desired cutting height.

Guide to lubricating wheel bearings, king pins, and steering gear.

Routine oiling of parts, maintenance of sealed bearings, and battery care.

Proper procedures for storing the battery and maintaining its charge.

Instructions for adjusting the mower's brake system for optimal performance.

Guidelines for removing, sharpening, or replacing the mower's cutting blades.

How to remove slack and adjust the drive chain tension correctly.

Steps to detach the V-belt from the engine pulley for maintenance.

Details on front wheel caster, camber, and toe-in for proper steering.

Recommended steps for preparing the mower for long-term storage.

Schematic diagram of the mower's electrical components and wiring.

Lists of part numbers and descriptions for specific mower models.

Comprehensive parts list for the 135-380A and 135-385A models.

Details on front and rear wheel assemblies, including tire size.

Component part numbers for deck and belt systems.

Specifications for front and rear wheels, tire sizes, and related parts.

Information on how to order parts and find authorized service centers.

Guidelines for making warranty claims and required documentation.