Series 700 Lawn Tractor
100
Reverse Safety Switch
The Reverse Safety Switch is a simple metal contact
tang switch.
CVT transmissions
Tractors that have the CVT transmissions have the
reverse switch mounted on the left side of the frame, by
the rear wheel. When the tractor is placed in reverse, the
shift linkage will contact the switch providing a ground.
This switch has a
red wire with black trace that goes
directly to the RMC module.
See Figure 7.12.
Hyrdostatic transmissions
The Reverse Safety Switch is a simple metal contact
tang. The gear selector touches it when placed in the
reverse position, providing a ground path through the gear
selector lever itself.
See Figure 7.13.
Figure 7.12
Reverse Safety
Switch
Figure 7.13
Reverse switch
FOR DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
