Cutting Decks
149
Cutting decks
The 700 series riders comes with a variety of deck options. The eighth digit of the model number will identify
which deck is on the tractor.
The most common decks used on the 700 series are the F, G and T decks.
NOTE: This service manual cannot begin to cover all the belt and deck configurations on the 700 series trac-
tor. We will cover some common examples and procedures. Refer to the Illustrated Parts List for a
complete diagram and list of parts for the rider.
Deck Wash Features
Most of our decks have a cutout for installing a quick
disconnect deck wash fitting. Some decks come with that
feature installed. Others come with a deck plug bolt
secured to the deck with a flat washer, lock washer and
hex nut. The water nozzle and adaptor can be installed at
a later date. A Double D port in the deck helps align and
secure the nozzle during installation. See Figure 8.1.
Letter Deck
F 38” Twin blade deck
G 42” Twin blade deck
R 42” Timed twin blade deck
S 42” Twin blade deck
T 46” Twin blade deck
Figure 8.1
Deck Wash Plug
CHAPTER 8: CUTTING DECKS
FOR DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
