Maintenance Intervals
173
Lubrication
To help keep the 700 series in proper running order it is recommended the following lubrication intervals be used
(adjustable to local conditions). Use a high quality petroleum grease to lubricate the tractor.
Engine maintenance
The recommended maintenance intervals listed in this manual are a guideline. Refer to the specific engine manual
that came with your tractor. Local conditions such as a dusty environment may require more frequent service of some
components.
Lubrication Chart
Lube Point
Number of
fittings
Interval
Pivot bar 2 25 hours
Wheel bearings 2 25 hours
Spindles 2 or 3 10 hours
Pedal pivot points 10 hours
Remove rear wheels and grease
rear axle shaft
Yearly
Engine Maintenance
Maintenance items Interval
Oil Change Change oil after first 8 hours on a new engine and then
every 100 hrs or yearly before storage
Oil FIlter Replace when changing oil unless engine manufacturer
recommends longer interval
Air filter pre cleaner
(if applicable)
25 hrs
Air filter 50 hrs or yearly
Gap spark plug/s 100 hrs
Replace spark plug/s 200 hrs
Fuel filter 100 hrs or yearly before storage
Adjust valve lash 200 hours
CHAPTER 9: MAINTENANCE INTERVALS
FOR DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
