Body Panels
23
What is covered by this chapter
The intent of this chapter is to describe the removal and disassembly of the major body panels on the tractor.
•Hood
•Seat
• Fenders
• Dash panel
NOTE: It is not absolutely necessary to remove the mowing deck for any procedures covered in this section.
The technician may choose to remove the mowing deck so that it is easier to reach some parts of the
tractor.
Hood Removal
NOTE: The hood described in this section is the “S” style hood. Other hood styles are used on different mod-
els. Most of these models are front hinged but may have a different hood mounting bracket depending
upon the engine used on the rider. The “2” style hood is a multi-piece hood with a front pivot near top of
the grill assembly. Refer to the illustrated parts list as a reference for removing that hood or additional
illustrations.
1. The hood is front-hinged. See Figure 4.1.
2. Open the hood by lifting the rear edge to tilt it for-
ward.
Figure 4.1
“S” style hood
CHAPTER 4: BODY PANELS
FOR DISCOUNT PARTS CALL 606-678-9623 OR 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
